Ruckus Wireless ZoneFlex 7343 Guía de usuario descargar pdf (Pagina 116)

108

Managing the Access Point

Working with Event Logs and Syslog Servers

Both the Maintenance > Support Info and Administration > Log pages can be used

to view the AP’s current log file text. You can use the former to send the log to Ruckus

Wireless support directly or save it to a local file, and use the latter to configure

automatic delivery of log files to a syslog server.

Enabling Logging and Sending Event Logs to a

Syslog Server

If you have a syslog server on the network, you can configure the Access Point to send

the device logs to the server. You will need to enable logging (if disabled) and

configure the Access Point to send logs to the syslog server.

1. Go to Administration > Log. The Administration > Log page appears.

2. Look for Log Status, and then click Enabled.

3. After enabling logging, configure the following options:

• Syslog Server Address: To enable the AP to send messages to a syslog server

as they appear, enter the IP address of the syslog server.

• Syslog Server Port: By default, the syslog port number is 514. If the syslog

server is using a different port, enter that port number in this field.

4. Click Update Settings to save and apply your changes.

Figure 56. The Administration > Log page

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 127 128

Sin comentarios

Ruckus Wireless ZoneFlex 7343 Guía de usuario Pagina 116