Ruckus Wireless ZoneFlex series Guía de usuario descargar pdf (Pagina 78)

Configuring the Access Point

Configuring WLAN Settings

Figure 33. WEP settings

Using WPA

Use of WPA (Wi-Fi Protected Access) or WPA2 provides enhanced security over WEP,

and allows client authentication based on either a pre-shared key (PSK), for home or

small office networks, or an external authentication server such as a RADIUS server,

for corporate networks.

To configure WPA security settings

1. Go to Configuration > Wireless. The Configuration :: Wireless :: Common page

appears.

NOTE: If you are using a ZoneFlex 7363/7762/7962 AP, go to Configuration > Radio

2.4G or Configuration > Radio 5G.

2. Click the Wireless # tab that you want to configure. The Configuration :: Wireless

:: Wireless[#] page appears.

3. Select WPA from the Encryption Method drop-down menu. An additional set of

WPA-specific encryption options appears on the page.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 107 108

Sin comentarios

Ruckus Wireless ZoneFlex series Guía de usuario Pagina 78