Ruckus Wireless ZoneFlex 2741 802.11g Guía de usuario descargar pdf (Pagina 48)

Attaching the Mounting Brackets

Step 1: Attach the Static Bracket to the Mounting Surface

9. Using a 10mm open-end wrench, tighten the nuts to secure the bracket to the

mounting surface. Screw torque value must be 4kg-5kg. As you tighten the nuts, the

metal cones that are built into the wall anchors will expand and lock the wall anchors

into place.

10. Continue to “Step 2: Attach the Dynamic Bracket to the Access Point”

Attaching the Bracket to a Pole

The Access Point can be mounted vertically or horizontally on a 30mm to 60mm (1.18 in.

to 2.36 in.) pole.

1. Insert the open end of the steel clamp into the two tabs on the bracket.

Figure 30. Insert the steel clamp into the two tabs on the bracket

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 57 58

Sin comentarios

Ruckus Wireless ZoneFlex 2741 802.11g Guía de usuario Pagina 48